4062 Omnidirectional , Low Sensitivity
The 4062 is available in two colors: black andbeige
DPA 4062 is acoustically identical with the 4060, but the sensitivity is adjusted to match some of the more sensitive transmitters on the market. For acordless microphone, choose from our adapter system or a hardwired connector.
The 4062 handles high sound pressure levels and is ideal for drums and brass.
Bychanging the suppliedgrids (one high boost and one soft boost) you can acoustically modify the mic's response according to placement. Additionally, a range of accessories is available, such as different coloredwindscreens, clips and holders, extension cables, andpower supplies.
A wide range of connection adapters makes it possible to use DPA miniature microphones with all professional UHF, VHF or digital wireless systems.
DPA has adapters for AKG, Audio Ltd., Audio-Technica, Beyerdynamic, Electro-Voice, Lectrosonics, Micron, Mipro, Pastega, Telex ProStar, Ramsa, Samson, Sennheiser, Shure, Sony, Toa, Vega and other systems. Each adapter for your cordless microphone is guaranteed to perfectly mate to your system of choice.
Offering great detail and resolution, the 4062shave a neutral sonic character andare very natural sounding. The 4062 has a very low noise floor, impressive sensitivity and can handle high SPLs. The noise floor of the DPA 4062 is 33 dB(A) re. 20 Pa and if powered correctly the microphone will be able to handle sound pressure levels up to 154 dB SPL before clipping occurs. For full technical specs, please click the Specifications tab above.
The DPA 4061, 4062 and 4063 are acoustically identical to the 4061 but have different SPL handling or sensitivity.
Specifications for 4062 Omnidirectional , XLo-Sens
|Principle of operation:
|| Pre-polarized condenser element with vertical diaphragm
|Frequency range, 2 dB:
|| Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz.
|Sensitivity, nominal, 3 dB at 1 kHz:
|| 1 mV/Pa; -60 dB re. 1 V/Pa
|Equivalent noise level A-weighted:
|| Typ. 33 dB(A) re. 20 Pa (max. 37 dB(A))
|Equiv. noise level ITU-R BS.468-4:
|| Typ. 45 dB (max. 49 dB)
|S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
|| 61 dB(A)
|Total harmonic distortion (THD):
||< 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
|| Typ. 90 dB
|Max. SPL, peak before clipping:
|| 154 dB
|| 30 - 40 ohm
|Cable drive capability:
|| Up to 300 m (984 ft)
|| For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power 4 V for full performance.
|| Black, beige
|| 7.5 g (0.26 oz) incl. cable and MicroDot connector
|| 5.4 mm (0.21 in)
|| Max. 12.7 mm (0.5 in)
|| 1.8 m (5.9 ft)
|| 1.6 mm (0.06 in)
|| Positively increasing sound pressure produces positive going voltage on MicroDot pin
|Operating temperature range:
|| -40 C to 45 C (-40 F to 113 F)
|Relative Humidity (RH):
|| Up to 90%